Operating room cover set No. 2

The latest technological developments in the field of nonwoven materials - spunlace, spunbond, CMC - are used in the production of disposable products for the operating room. These fabrics are non-toxic, antistatic and meet all the necessary requirements for this type of product. Products made of new generation nonwoven materials meet all modern requirements for medical products. The latest technological developments in the field of nonwoven materials - spunlace, spunbond, CMC - are used in the production. These fabrics are non-toxic, antistatic and meet all the necessary requirements for such products.

Nonwovens are excellent substitutes for expensive textile materials, possessing properties such as: fabric density, strength, air permeability, etc. In nonwovens, fibers are thermally bonded without the use of weaving. Nonwovens are used for the manufacture of medical clothing and kits, surgical drapes, bed linen, and much more.

Properties

The use of nonwoven materials for medical purposes is based, first of all, on their high functional properties:

microporosity hydrophilicity (hydrophobicity) good breathability with simultaneous dust protection function antiseptic properties (barrier properties against microorganisms) lack of lint wear resistance

composition

CMC is a three-layer material - with 100% propylene fibers. A distinctive feature is the presence of a spunbond material called meltblown between the two layers. Meltblown is a material consisting of polypropylene fibers with a thickness of 0.01 - 0.2 dtex. CMC has very high absorbent properties, which allows the composite material based on it to not pass biologically active liquids, fats and chemicals.

Kit

Operating table cloth 200x160 cm - 1 piece (CMC - 35 g/m2), Operating table cover 140x80 cm for the instrument table - 1 piece (laminated spunbond - 45 g/m2); OP cover 160x160 cm with adhesive edges - 2 pieces (CMC - 35 g/m2), Operating cover 80x70 cm with adhesive edge (long side) - 2 pieces (CMC - 35 g/m2)