Set of operating room clothing and coverings for laparoscopy No. 1/b

Medical clothing is a specialized type of clothing. It is subject to a number of special requirements regarding ease of sterilization, disinfection, antistatic properties and ergonomics. In fact, medical clothing is the face of the entire industry, so its quality and appearance have recently been subject to increased requirements.

composition

medical cap-beret – 1 piece (spunbond – 13 g/m2); medical three-layer mask with elastic bands – 1 piece (spunbond, meltblown filter layer); medical gown (surgical) with straps, length 130 cm (size 50-52 (L)) – 1 piece (CMC -35 g/m2); medical shoe covers – 1 pair (spunbond – 30 g/m2); surgical cover 300x160 cm for the limb with a rubber elastic cuff – 1 piece (CMC – 35 g/m2), Operating surface 200x160 cm for the operating table – 1 piece (CMC – 35 g/m2), Operating tablecloth 200x160 cm - for curves with adhesive edges (long side) – 1 piece (CMC - 35 g/m2); Cover 150x80 cm for Mayo instrument table – 1 pc (CMC + laminated spunbond – 35 + 45 g/m2); protective cover for limbs 80x35 cm – 1 pc (CMC – 35 g/m2); operating cover 35x20 cm – 4 pcs (Spunlace – 50 g/m2); absorbent diaper 60x60 cm with adhesive edge - 1 pc; adhesive tape 50x5 cm – 3 pcs.

Fabric for medical overalls must meet the following requirements:

High degree of breathability; soft to the touch; high resistance to moisture; sufficient tensile strength.