Syringe 2 ml 3-component LC Laser Care Luer Slip with 2 needles 24G (0.55x25mm) and 23G (0.6x30mm) No. 1

Instructions Syringe 2 ml 3-component LC Laser Care Luer Slip with 2 needles 24G (0.55x25mm) and 23G (0.6x30mm) No. 1

Medical device description

Disposable syringes, sterile, pyrogen-free, non-toxic. Available in individual, group and transport packaging.

The syringe contains:

• transparent cylinder made of polypropylene, on which a clear and abrasion-resistant volume scale is applied. On one side, the cylinder ends with a locking ring, on the other - with a cone for connection;
• piston and elastic cuff (if the syringe is 3-component);
• one or two atraumatic metal needles with a triangular sharpening, located in individual caps; The perfusion syringe has the following features:
• There is a special plastic cuff on the cylinder cone, and a groove on the piston at the distal end for fixing the syringe in the infusion pump;
• an additional volume scale with a graduation step of 1 ml is placed along the entire length of the piston;
• The piston is made of synthetic material (does not contain natural latex), has a greater thickness and two sealing rings, which ensures a smoother stroke during slow aspiration or administration of medication.

Syringes have the following types of connections:

• Luer Slip – a type of needle connection in which the needle is put on the cone of the cylinder;
• Luer Lock is a type of needle connection in which the needle is screwed into the cone of the cylinder.

Method of application

1. Check the integrity of the individual packaging and the expiration date. Do not use if the packaging is damaged or the expiration date has passed.
2. Select the syringe of the required volume and type. Wash your hands thoroughly.
3. Open the syringe package at the location marked “OPEN HERE.” Make sure the syringe is complete.
4. Use immediately after opening the package.
5. Use one needle to draw the infusion fluid into the syringe, and the other for injection (if the syringe is equipped with two needles).
6. Treat the skin surface with an antiseptic before inserting a sterile needle.
7. Perform the injection after checking the patency of the needle with the injected solution.
8. After the injection, remove the needle from the skin, press the puncture site with a cotton swab moistened with antiseptic for 1-2 minutes. If necessary, apply a dry sterile bandage for 24 hours.
9. After use, the syringe and needles should be disposed of in accordance with national requirements.

Application area

1. Injection syringes with Luer Slip, Luer Lock connection types and with an integrated needle are used for intravenous, intramuscular, subcutaneous, intradermal and intracavitary administration of drugs or for blood sampling.
2. "ALEXPHARM" sterile disposable injection syringes can be used in veterinary medicine.

Medical device sterilization method

Sterilization is carried out with ethylene oxide.

Storage conditions

Store in a dry place, protected from direct sunlight, at an ambient temperature of +5 °C to +40 °C.

Expiration date

The expiry date is stated on the packaging (see Use by). Do not use after the expiry date.

Producer

Jangsu Kanghua Medical Equipment Co., Ltd. Ltd., Sanheku 213115 Changzhou, China

Jiangsu Kanghua Medical Equipment Co., Ltd. Ltd., Sanhekou 213115 Changzhou, PEOPLES REPUBLIC OF CHINA

Authorized representative of the manufacturer:

Alexpharm LLC
11 Kyivskyi Shlyakh St., Boryspil, Kyiv region, 08303, Ukraine
phone: (044) 451-77-24, phone/fax: (04595) 5-40-00
e-mail: office@alexpharm1.com.ua; www.alexpharm1.com.ua